10/100/1000M Dual Fiber: 2-port SC/ST/FC & 4-port RJ45 Fiber Media Converter.

The 10/100/1000Base auto-sensing dual fiber Ethernet media converter converts the electrical signal of a 10/100/1000 Ethernet signal from copper to fiber. This solution will offer a low-cost integration option for network managers who want to migrate from 10/100 networks to Gigabit Ethernet. Gigabit only switches can now be connected to 10/100 networks without the need to upgrade the 10/100 side, allowing network managers to add new equipment gradually.

Features

• Data rate: 10/100/1000M
• Compliant with IEEE 1000Base-T and 1000Base-LX
• One 10/100/1000Base-T RJ-45 port autosensing featured
• One 1000Base-LX/SX Port w/ SC/ST-Type Connector
• UTP port supports: MDI / MDI-X auto crossover
• Supporting the max 1536 bytes packets
• Wavelength: 850nm/1310nm/1550nm
• Status LED indicators for Power, Link/Activity, Full-Duplex, and Speed
• Supporting flow control
• Stand alone or card type can be chosen
• Adopting internal power supply

Specifications

• Operating standards: IEEE802, 3z/AB, 1000Base-T and 1000Base-SX/LX
• MAC address table: 4K
• Data buffer: 256K
• UTP Connector: RJ-45 10/100/1000Mbps; Fiber Connector: SC 100Mbps
• UTP Cable: UTP: Cat. 5e or Cat. 6 (the max distance up to 100m)
• Fiber (multimode): 50/125, 62. 5/125µm (the max distance up to 550/224m)
• Fiber (single mode): 8. 3/125, 8. 7/125, 9/125, 10/125µm (the max distance up to 80km)
• Full Duplex: Supporting standard IEEE802. 3x
• LED Indicators: FX LINK, FX FDX, TP LINK, TP FDX, ACT, POWER
• Half Duplex: Back pressure
• Power: AC 90 ~ 240V; DC 5V.2A
• Working temperature: 0 ~ 50?
• Storage temperature: -20 ~ 70?
• Humidity: 5% ~ 90% (non-condensing)