10/100M Fast Ethernet 1 SFP Slot & 1 RJ45 Port SFP Media Converter.

This converter is designed to meet the massive needs for Fast network deployment and is able to extend a copper based Fast network via fiber cable to a maximum distance up to 120KM. This converter is fully compliant with IEEE802.3 & 802.3u standards. It can be installed into a Standard Converter Chassis. Installation & operation procedures are simple & straightforward. Operation status can be locally monitored through a set of Diagnostic LED located in the front panel.

Features

• 10/100Base-T to 100BASE-FX Converter
• Standard: IEEE 802.3 IEEE 802.3u
• Interface: 1 x RJ-45 connector & 1 x SFP Slot
• MDI/MDIX Auto-Crossover supported
• LED: Power, FX-LINK, TX-LINK, FDX/COL, SD 100.
• Plug and Play installation
• Support Link Alarm
• Support Jumbo Frame (64-9216 Byte)
• Support Voltage Monitor

Specifications

• Standard Protocol: IEEE802.3 10 Base-T standard, IEEE 802.3u 100Base-TX/FX standard
• Connector: One RJ-45connector, one SFP slot
• Operation mode: Full duplex mode or half duplex mode
• Power supply parameter: Outside: 5V DC 1A
• Environmental temperature: 0°C - 60°C
• Relative humidity: 5% - 90%
• TP cable: Cat5 UTP cable
• Fiber: 50/125, 62.5/125um multi-mode fiber; 9/125, 10/125um single-mode fiber